<!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Editable Boilerplate Text ** ** Each information chapter has verbatim text, but some require user specific ** information. Some user specific information is known during the TM start and ** some will be edited later in the TM development. The document for each ** editable user specific entity provides the information to insert and ** location in MIL-STD-40051-1C and -2C. ** ** -FORMAL PUBLIC IDENTIFIER (FPI)- ** "-//USA-DOD//ENTITIES MIL-STD-2361 Editable Boilerplate REV C 6.0 20150630//EN" ******************************************************************************** --> <!-- DOCUMENTATION ******************************************************************************** ** B O I L E R P L A T E E D I T A B L E T E X T ** ** -INSTRUCTION- ** Boilerplate information NOT used in the TM is ignored and not shown, thus ** it does NOT require modification. ** ** The information is organized by front matter and information chapters. ** The information is organiizad by frontcover abbreviated for LUBE Orders. The Lube Order entities are cover at the end of this boilerplate. ** The editable boilerplate entity name is constructed using the main ** boilerplate entity name followed by a "-" and then the editable part name. ** ** -EXAMPLE- ** "ginfowp.qual.mat.info-tm" where the parent boilerplate entity ** name is "ginfowp.qual.mat.info" and the editable part name is "-tm". ** ** The main boilerplate entity name is constructed is designed to use the work ** package element, descendent element(s), and boilerplate name. ** ** -EXAMPLE- ** "ginfowp.qual.mat.info" where the work package element is "ginfowp", the ** descendent element is "qual.mat", and the boilerplate name is "info". ******************************************************************************** --> <!-- DOCUMENTATION ******************************************************************************** ** C O M M O N ** ** E D I T A B L E E N T I T Y ******************************************************************************** --> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Short End Item Name ** ** -INSTRUCTION- ** -INSERT- The TM corresponding short end item name. ** ** -ENTITY USED IN- ** + General Information Work Package <ginfowp> ** - EIR <eir> ** - Warranty <wrntyref> ** - Mobilization Requirements <mobreq> ** + COEI and BII Work Package <coeibiiwp> ** + AAL Work Package <aalwp> ** + Expendable/Durable Items Work Package <explistwp> ** + Tools and Special Tools Identification Work Package <toolidwp> ** ** -SOURCE- ** MIL-STD-40051-1C Distribution statement <dist>. ** 5.2.1.1.8 ** B.5.2.5 EIR <eir> ** B.5.2.11 Warranty <wrntyref> ** B.5.2.23 Mobilization Requirements <mobreq> ** G.5.4.3.1 COEI and BII Work Package <coeibiiwp> ** G.5.5.3.1 AAL Work Package <aalwp> ** G.5.6.3 Expendable/Durable Items Work Package <explistwp> ** G.5.7.3 Tools and Special Tools Identification Work Package <toolidwp> ** ** MIL-STD-40051-2C (insert the short end item name or equipment name) ** 5.2.1.1.8 ** B.5.2.5 EIR <eir> ** B.5.2.11 Warranty <wrntyref> ** B.5.2.23 Mobilization Requirements <mobreq> ** G.5.4.3.1 COEI and BII Work Package <coeibiiwp> ** G.5.5.3.1 AAL Work Package <aalwp> ** G.5.6.3 Expendable/Durable Items Work Package <explistwp> ** G.5.7.3 Tools and Special Tools Identification Work Package <toolidwp> ** ** -ENTITY LIST- ** short.end.item.name ** short.model.number ******************************************************************************** --> <!ENTITY short.end.item.name "INSERT THE SHORT END ITEM NAME"> <!ENTITY short.model.number "INSERT THE SHORT MODEL NUMBER"> <!-- DOCUMENTATION ******************************************************************************** ** F R O N T M A T T E R ** ** E D I T A B L E D A T A ******************************************************************************** --> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Army Proponent Activity and Address ** ** -INSTRUCTION- ** -INSERT- The Army proponent activity name and address ** ** -ENTITY USED IN ENTITIES- ** notices.avail ** titleblk.reporting.std-pocket.army ** titleblk.reporting.std-pocket.multi-service ** titleblk.reporting.class.army ** titleblk.reporting.class.multi-service ** titleblk.reporting.class.ietm.army ** titleblk.reporting.ietm.multi-service ** lubeorder.frntcover_abbreviated.reporting ** ** -ENTITY LIST- ** proponent-address.army ** army-tm (see selectboil.ent) ******************************************************************************** --> <![%army-tm;[ <!ENTITY proponent-address.army '<proponent> <name>INSERT ARMY PROPONENT NAME</name> <address> <servnomen>OPTIONAL SERVICE NOMENCLATURE</servnomen> <street>0 OR MORE STREET INFORMATION</street> <city>INSERT CITY,</city> <state>INSERT STATE</state> <zip>OPTIONAL ZIP CODE</zip> <country>OPTIONAL COUNTRY</country> </address></proponent>'> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Reporting Army Proponent Fax and Email Data ** ** -INSTRUCTION- ** -IF- No DSN Fax Telephone Number ** -THEN- -REPLACE- "INCLUDE" to "IGNORE" ** -INSERT- The Army FAX DSN telephone number (if applicable) ** -INSERT- The Army FAX commercial telephone number ** -INSERT- The Army Email address. ** ** -ENTITY USED IN ENTITY- ** titleblk.reporting.std-pocket.army ** titleblk.reporting.std-pocket.multi-service ** titleblk.reporting.ietm.army ** lubeorder.frntcover_abbreviated.reporting ** ** -ENTITY LIST- ** proponent-fax.army ** proponent-email.army ** army-tm (see selectboil.ent) ** ** -SOURCE- ** MIL-STD-40051-1C ** 5.2.1.6.7 Reporting errors and recommending improvements statement ** <reporting>. ** ** MIL-STD-40051-2C ** 5.2.1.7.1 Reporting errors and recommending improvements statement ** <reporting>. ******************************************************************************** --> <![%army-tm;[ <!ENTITY proponent-fax.army '<![INCLUDE[<phone type="dsn" receive="fax"></phone> and ]]><phone type="coml" receive="fax">INSERT FAX Number</phone>'> <!ENTITY proponent-email.army '<internet show.address="yes"><email address="INSERT EMAIL ADDRESS"/></internet>'> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** USMC Proponent Activity and Address ** ** -INSTRUCTION- ** -INSERT- The USMC proponent activity name and address ** -REMOVE- Optional XML elements not used. Marked with OPTIONAL or 0 or More. ** ** -ENTITY USED IN ENTITIES- ** titleblk.reporting.std-pocket.usmc ** titleblk.reporting.std-pocket.multi-service ** titleblk.reporting.class.usmc ** titleblk.reporting.class.multi-service ** titleblk.reporting.class.ietm.usmc ** titleblk.reporting.ietm.multi-service ** lubeorder.frntcover_abbreviated.reporting ** ** -ENTITY LIST- ** proponent-address.usmc ** usmc-tm (see selectboil.ent) ** ** -SOURCE- ** MIL-STD-40051-1C ** 5.2.1.6.7 Reporting errors and recommending improvements statement ** <reporting>. ** ** MIL-STD-40051-2C ** 5.2.1.1.1 Reporting errors and recommending improvements statement ** <reporting>. ******************************************************************************** --> <![%usmc-tm;[ <!ENTITY proponent-address.usmc '<proponent> <name>INSERT USMC PROPONENT NAME</name> <address> <servnomen>OPTIONAL SERVICE NOMENCLATURE</servnomen> <street>0 OR MORE STREET INFORMATION</street> <city>INSERT CITY,</city> <state>INSERT STATE</state> <zip>OPTIONAL ZIP CODE</zip> <country>OPTIONAL COUNTRY</country> </address></proponent>'> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Reporting USMC Proponent Fax and Email Data ** ** -INSTRUCTION- ** -IF- No DSN Fax Telephone Number ** -THEN- -REPLACE- "INCLUDE" to "IGNORE" ** -INSERT- The USMC FAX DSN telephone number (if applicable) ** -INSERT- The USMC FAX commercial telephone number ** -INSERT- The USMC Email address. ** ** -ENTITY USED IN ENTITY- ** titleblk.reporting.std-pocket.usmc ** titleblk.reporting.std-pocket.multi-service ** titleblk.reporting.ietm.usmc ** lubeorder.frntcover_abbreviated.reporting ** ** -ENTITY LIST- ** proponent-fax.usmc ** proponent-email.usmc ** usmc-tm (see selectboil.ent) ** ** -SOURCE- ** MIL-STD-40051-1C ** 5.2.1.6.7 Reporting errors and recommending improvements statement ** <reporting>. ** ** MIL-STD-40051-2C ** 5.2.1.7.1 Reporting errors and recommending improvements statement ** <reporting>. ******************************************************************************** --> <![%usmc-tm;[ <!ENTITY proponent-fax.usmc '<![IGNORE[<phone type="dsn" receive="fax">INSERT DSN FAX TELEPHONE NUMBER</phone> and ]]><phone type="coml" receive="fax">INSERT COMMERCIAL FAX TELEPHONE NUMBER</phone>'> <!ENTITY proponent-email.usmc '<internet show.address="yes"><email address="INSERT EMAIL ADDRESS"/></internet>'> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** USN Proponent Activity and Address ** ** -INSTRUCTION- ** -INSERT- The USN proponent activity name and address ** ** -ENTITY USED IN ENTITIES- ** titleblk.reporting.std-pocket.multi-service ** titleblk.reporting.class.multi-service ** titleblk.reporting.ietm.multi-service ** lubeorder.frntcover_abbreviated.reporting ** ** -ENTITY LIST- ** proponent-address.usmc ** usn-tm (see selectboil.ent) ** ** -SOURCE- ** MIL-STD-40051-1C ** 5.2.1.6.7 Reporting errors and recommending improvements statement ** <reporting>. ** ** MIL-STD-40051-2C ** 5.2.1.7.1 Reporting errors and recommending improvements statement ** <reporting>. ******************************************************************************** --> <![%usn-tm;[ <!ENTITY proponent-address.usn '<proponent> <name>INSERT USN PROPONENT NAME</name> <address> <servnomen>OPTIONAL SERVICE NOMENCLATURE</servnomen> <street>0 OR MORE STREET INFORMATION</street> <city>INSERT CITY,</city> <state>INSERT STATE</state> <zip>OPTIONAL ZIP CODE</zip> <country>OPTIONAL COUNTRY</country> </address></proponent>'> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Reporting USN Proponent Fax and Email Data ** ** -INSTRUCTION- ** -IF- No DSN Fax Telephone Number ** -THEN- -SET- "INCLUDE" to "IGNORE" ** -INSERT- The USN FAX DSN telephone number (if applicable) ** -INSERT- The USN FAX commercial telephone number ** -INSERT- The USN Email address. ** ** -ENTITY USED IN ENTITY- ** titleblk.reporting.std-pocket.multi-service ** ** -ENTITY LIST- ** proponent-fax.usn ** proponent-email.usn ** usn-tm (see selectboil.ent) ** ** -SOURCE- ** MIL-STD-40051-1C ** 5.2.1.6.7 Reporting errors and recommending improvements statement ** <reporting>. ** ** MIL-STD-40051-2C ** 5.2.1.7.1 Reporting errors and recommending improvements statement ** <reporting>. ******************************************************************************** --> <![%usn-tm;[ <!ENTITY proponent-fax.usn '<![IGNORE[<phone type="dsn" receive="fax">INSERT DSN FAX TELEPHONE NUMBER</phone> and ]]><phone type="coml" receive="fax">INSERT COMMERCIAL FAX TELEPHONE NUMBER</phone>'> <!ENTITY proponent-email.usn '<internet show.address="yes"><email address="INSERT EMAIL ADDRESS"/></internet>'> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** USAF Proponent Activity and Address ** ** -INSTRUCTION- ** -INSERT- The USAF proponent activity name and address ** ** -ENTITY USED IN ENTITIES- ** titleblk.reporting.std-pocket.multi-service ** titleblk.reporting.class.multi-service ** titleblk.reporting.ietm.multi-service ** lubeorder.frntcover_abbreviated.reporting ** ** -ENTITY LIST- ** proponent-address.usaf ** usaf-tm (see selectboil.ent) ** ** -SOURCE- ** MIL-STD-40051-1 ** 5.2.1.6.7 Reporting errors and recommending improvements statement ** <reporting>. ** ** MIL-STD-40051-2 ** 5.2.1.7.1 Reporting errors and recommending improvements statement ** <reporting>. ******************************************************************************** --> <![%usaf-tm;[ <!ENTITY proponent-address.usaf '<proponent> <name>INSERT USAF PROPONENT NAME</name> <address> <servnomen>OPTIONAL SERVICE NOMENCLATURE</servnomen> <street>0 OR MORE STREET INFORMATION</street> <city>INSERT CITY,</city> <state>INSERT STATE</state> <zip>OPTIONAL ZIP CODE</zip> <country>OPTIONAL COUNTRY</country> </address></proponent>'> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Reporting USAF Proponent Fax and Email Data ** ** -INSTRUCTION- ** -IF- No DSN Fax Telephone Number ** -THEN- -REPLACE- "INCLUDE" to "IGNORE" ** -INSERT- The USAF FAX DSN telephone number (if applicable) ** -INSERT- The USAF FAX commercial telephone number ** -INSERT- The USAF Email address. ** ** -ENTITY USED IN ENTITY- ** titleblk.reporting.std-pocket.multi-service ** ** -ENTITY LIST- ** proponent-fax.usaf ** proponent-email.usaf ** ** -SOURCE- ** MIL-STD-40051-1 ** 5.2.1.6.7 Reporting errors and recommending improvements statement ** <reporting>. ** ** MIL-STD-40051-2 ** 5.2.1.7.1 Reporting errors and recommending improvements statement ** <reporting>. ******************************************************************************** --> <![%usaf-tm;[ <!ENTITY proponent-fax.usaf '<![IGNORE[<phone type="dsn" receive="fax">INSERT DSN FAX TELEPHONE NUMBER</phone> and ]]><phone type="coml" receive="fax">INSERT COMMERCIAL FAX TELEPHONE NUMBER</phone>'> <!ENTITY proponent-email.usaf '<internet show.address="yes"><email address="INSERT EMAIL ADDRESS"/></internet>'> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Reporting Multi-Service Proponent Fax and Email Data (Frame-base Only) ** ** -INSTRUCTION- ** -IF- No DSN Fax Telephone Number ** -THEN- -REPLACE- "INCLUDE" to "IGNORE" ** -INSERT- The proponent FAX DSN telephone number (if applicable) ** -INSERT- The proponent FAX commercial telephone number ** -INSERT- The proponent Email address. ** ** -NOTE- The information may be the same as service contact data. ** ** -ENTITY USED IN ENTITY- ** titleblk.reporting.ietm.multi-service ** ** -ENTITY LIST- ** proponent-fax ** proponent-email ** frame-base (see selectboil.ent) ** ** -SOURCE- ** MIL-STD-40051-1 ** 5.2.1.6.7.a(3) Reporting errors and recommending improvements statement ** <reporting>. ******************************************************************************** --> <![%frame-base;[ <!ENTITY proponent-fax '<![IGNORE[<phone type="dsn" receive="fax">INSERT DSN FAX TELEPHONE NUMBER</phone> and ]]><phone type="coml" receive="fax">INSERT COMMERCIAL FAX TELEPHONE NUMBER</phone>'> <!ENTITY proponent-email '<internet show.address="yes"><email address="INSERT EMAIL ADDRESS"/></internet>'> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** "How to Use This Manual" International Standardization Agreements ** ** -INSTRUCTION- ** -INSERT- ** The reference information for "howtouse.intl-agree.ref" using either ** the <xref> or <link> elements. This reference(s) are internal to the TM and ** may include multiple references to work packages, tasks, steps, and/or ** paragraph. ** ** -INSERT- ** The reference information for "howtouse.intl-agree.pg" using either ** the <extref> or <link> elements. This reference(s) are external to the TM and ** specifies the international standardization documents. Several examples are ** the ABCA or ASCC standard number; the NATO STANAG, NETR, or NEPR NUMBER; or ** appropriate documentary reference). ** ** -ENTITY USED IN ENTITY- ** howtouse.intl-agree ** ** -ENTITY LIST- ** howtouse.intl-agree.ref ** howtouse.intl-agree.pg ** ** -SOURCE- ** MIL-STD-40051-1 ** 5.2.1.9 International standardization agreements <howtouse>. ** ** MIL-STD-40051-2 ** 5.2.1.10.1 International standardization agreements <howtouse>. ******************************************************************************** --> <!ENTITY howtouse.intl-agree.ref '<xref wpid="REPLACE_WP_ID" taskid="REPLACE_TASK_ID" stepstart="REPLACE_STEP_ID"/>'> <!ENTITY howtouse.intl-agree.pg '<extref docno="REPLACE WITH THE ABCA OR ASCC STANDARD NUMBER; THE NATO STANAG, NETR, OR NEPR NUMBER; OR APPROPRIATE DOCUMENTARY REFERENCE"/>'> <!-- DOCUMENTATION ******************************************************************************** ** G E N E R A L I N F O R M A T I O N C H A P T E R ( G I M ) ** ** E D I T A B L E D A T A ******************************************************************************** --> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Warranty Period As Mileage Or Time Frame ** ** -INSTRUCTION- ** -INSERT- The warranty period as mileage or time frame. ** ** -ENTITY USED IN ENTITY- ** ginfowp.wrntyref ** ** -ENTITY LIST- ** ginfowp.wrntyref-time ** ** -SOURCE- ** MIL-STD-40051-1 ** B.5.2.11 Warranty information <wrntyref>. ** ** MIL-STD-40051-2 ** B.5.2.11 Warranty information <wrntyref>. ******************************************************************************** --> <!ENTITY ginfowp.wrntyref-time 'INSERT WARRANTY REFERENCE TIME FRAME'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Quality of Material - Replacement, Repair, or Modification Requirements ** TM/IETM ** ** -INSTRUCTION- ** -INSERT- The quality of material replacement, repair, or modification ** requirements TM/IETM document number. ** ** -ENTITY USED IN ENTITY- ** ginfowp.qual.mat.info ** ** -ENTITY LIST- ** ginfowp.qual.mat.info-tm ** ** -SOURCE- ** MIL-STD-40051-1C ** B.5.2.15 Quality of material (Unit/AVUM and above only) <qual.mat.info>. ** ** MIL-STD-40051-2C ** B.5.2.15 Quality of material (Unit/AVUM and above only) <qual.mat.info>. ******************************************************************************** --> <!ENTITY ginfowp.qual.mat.info-tm '<extref docno="INSERT THE TM OR IETM NUMBER"/>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Engineering Change Proposals Address ** ** -INSTRUCTION- ** -INSERT- The ECP Proponent name and address. ** ** -ENTITY USED IN ENTITY- ** ginfowp.ecp ** ** -ENTITY LIST- ** ginfowp.ecp-address ** ** -SOURCE- ** MIL-STD-40051-1C ** B.5.2.20 Engineering Change Proposals (ECPs) (DMWR/NMWR only) <ecp>. ** ** MIL-STD-40051-2C ** B.5.2.20 Engineering Change Proposals (ECPs) (DMWR/NMWR only) <ecp>. ******************************************************************************** --> <!ENTITY ginfowp.ecp-address '<proponent> <name>RESPONSIBLE COMMAND OR ACTIVITY PROPONENT NAME </name> <address> <servnomen>OPTIONAL SERVICE NOMENCLATURE</servnomen> <street>0 OR MORE STREET INFORMATION</street> <city>REQUIRED CITY,</city> <state>REQUIRED STATE</state> <zip>OPTIONAL ZIP CODE</zip> <country>OPTIONAL COUNTRY</country> </address></proponent>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Mobilization Requirements Reference ** ** -INSTRUCTION- ** -INSERT- The Mobilization Work Package unique identifier. ** ** -ENTITY USED IN ENTITY- ** ginfowp.mobreq ** ** -ENTITY LIST- ** ginfowp.mobreq-wp ** ** -SOURCE- ** MIL-STD-40051-1C ** B.5.2.23 Mobilization requirements (DMWR/NMWR only) <mobreq>. ** ** MIL-STD-40051-2C ** B.5.2.23 Mobilization requirements (DMWR/NMWR only) <mobreq>. ******************************************************************************** --> <!ENTITY ginfowp.mobreq-wp '<xref wpid="INSERT_THE_APPROPRIATE_WORK_PACKAGE_ID"/>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Repair Parts WP Reference ** ** -INSTRUCTION- ** -INSERT- The appropriate Part List Work Package unique identifier. ** ** -ENTITY USED IN ENTITY- ** ginfowp.supdata-partlist.wp ** ** -ENTITY LIST- ** ginfowp.supdata-partlist.wpref ** ** -SOURCE- ** MIL-STD-40051-1C ** B.5.2.26.3 Repair parts. ** ** MIL-STD-40051-2C ** B.5.2.26.3 Repair parts. ******************************************************************************** --> <!ENTITY ginfowp.supdata-partlist.wpref '<xref wpid="INSERT_THE_PART_LIST_WORK_PACKAGE_ID"/>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Supporting Data - Repair parts TM Reference ** ** -INSTRUCTION- ** -INSERT- The appropriate RPSTL TM number. ** ** -ENTITY USED IN ENTITY- ** ginfowp.supdata-partlist.tm ** ** -ENTITY LIST- ** ginfowp.supdata-partlist.tmref ** ** -SOURCE- ** MIL-STD-40051-2C ** B.5.2.26.3 Repair parts. ******************************************************************************** --> <!ENTITY ginfowp.supdata-partlist.tmref '<extref docno="REPLACE WITH RPSTL TM NUMBER"/>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Mobilization Requirements Reference ** ** -INSTRUCTION- ** -INSERT- The PPM Packaging Work Package unique identifier. ** ** -ENTITY USED IN ENTITY- ** ppmgeninfo ** ** -ENTITY LIST- ** maintwp.ppm.packaging.wp ** ** -SOURCE- ** MIL-STD-40051-1 ** E.5.3.9.1 Preservation, packaging, and marking general information work package ** ** MIL-STD-40051-2 ** E.5.3.9.1 Preservation, packaging, and marking general information work package ******************************************************************************** --> <!ENTITY maintwp.ppm.packaging.wp '<xref wpid="INSERT_THE_APPROPRIATE_WORK_PACKAGE_ID"/>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** PMS and PMI Reporting Errors and Recommending Improvements ** ** -INSTRUCTION- ** -INSERT- The proponent mailing address. ** -INSERT- The both proponent fax numbers for DSN and commercial. ** -INSERT- The proponent e-mail address. ** ** -ENTITY USED IN ENTITY- ** pms_or_pmi.eir ** ** -ENTITY LIST- ** pms_or_pmi.eir.address ** pms_or_pmi.eir.phone ** pms_or_pmi.eir.email ** pms_or_pmi-tm (see selectboil.ent) ** ** -SOURCE- ** MIL-STD-40051-1C ** B.5.5.4 General information <pms-geninfo>. ** ** MIL-STD-40051-2C ** B.5.5.4 General information <pms-geninfo>. ******************************************************************************** --> <![%pms_or_pmi-tm;[ <!ENTITY pms_or_pmi.eir.address "INSERT PROPONENT MAILING ADDRESS"> <!ENTITY pms_or_pmi.eir.fax '<phone type="dsn" receive="fax">INSERT PROPONENT DSN FAX NUMBER</phone> or <phone type="coml" receive="fax">INSERT PROPONENT COMMERCIAL FAX NUMBER</phone>'> <!ENTITY pms_or_pmi.eir.email '<internet show.address="yes"><email address="INSERT PROPONENT E-MAIL ADDRESS"/></internet>'> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** PMS Scope and General Information - References and Data ** ** Figure 1 - Reference to the WP or title and figure # requirements which have ** the inspected items and what conditions are desired/undesired. ** Figure 2 - Reference to the WP or title and figure # requirements which have ** inspection areas are shown. ** ** -INSTRUCTION- ** -INSERT- The WP identifier where the inspection area diagram figure resides ** in "wpid" attribute for <pms-ginfo.inspect-fig>. ** -INSERT- The figure identifier in "figid" attribute for ** <pms-ginfo.inspect-fig>. ** -INSERT- The appropriate aircraft model number. ** -INSERT- The inspection interval to be performed (i.e., 10 hour/14 day). ** -INSERT- The inspection performed flight hour cycle (i.e., ten). ** -INSERT- The inspection performed calendar days (i.e., fourteen). ** -INSERT- The next inspection day of week from Tuesday (i.e., Tuesday). ** -INSERT- For the WARNING add additional actuation equipment (i.e., firing ** of armament, jettison ballistics). Start each piece of equipment ** with ", or ". If no additional equipment is necessary, remove all ** text between the quotes. ** -INSERT- For the WARNING insert the maintenance TM number for the attribute ** 'docno'. ** -INSERT- For the WARNING if armament information is needed insert the ** armament TM number for the attribute 'docno'. ** ** If additional armament TM number references are needed add a ** <extref docno="Armament TM Number"/> for each manual. ** ** If no armament TM numbers apply, remove all text between quotes. ** -INSERT- The total number of man-hours (i.e., 4.0). ** -INSERT- The ozone depleting chemicals (ODC) statement. ** -INSERT- The hazard material statement. ** ** -ENTITY USED IN ENTITY- ** pms-ginfowp ** ** -ENTITY LIST- ** pms-ginfowp.inspect-fig ** pms-ginfowp.aircraft ** pms-ginfowp.inspect-interval ** pms-ginfowp.inspect-hrs ** pms-ginfowp.inspect-days ** pms-ginfowp.inspect-weeks ** pms-ginfowp.inspect-dayofweek ** pms-ginfowp.warning-equip ** pms-ginfowp.warning-tm-maint ** pms-ginfowp.warning-tm-arm ** pms-ginfowp.manhours ** pms-ginfowp.odc ** pms-ginfowp.hazmat ** pms_or_pmi-tm (see selectboil.ent) ** ** -SOURCE- ** MIL-STD-40051-1C ** B.5.5.3 Maintenance activities <scope>. ** B.5.5.4 General information <pms-geninfo>. ** ** MIL-STD-40051-2C ** B.5.5.3 Maintenance activities <scope>. ** B.5.5.4 General information <pms-geninfo>. ******************************************************************************** --> <![%pms_or_pmi-tm;[ <!ENTITY pms-ginfowp.inspect-fig '<xref wpid="INSERT_THE_APPROPRIATE_WORK_PACKAGE_ID" figid="INSERT_THE_APPROPRIATE_FIGURE_ID"/>'> <!ENTITY pms-ginfowp.aircraft "INSERT THE AIRCRAFT MODEL"> <!ENTITY pms-ginfowp.inspect-interval "INSERT THE INSPECTION INTERVAL"> <!ENTITY pms-ginfowp.inspect-hrs "INSERT THE AIRCRAFT HOURS"> <!ENTITY pms-ginfowp.inspect-days "INSERT THE CALENDAR DAYS"> <!ENTITY pms-ginfowp.inspect-weeks "INSERT THE NUMBER OF WEEKS"> <!ENTITY pms-ginfowp.inspect-dayofweek "INSERT THE DAY OF WEEK"> <!ENTITY pms-ginfowp.warning-equip "INSERT AIRCRAFT EQUIPMENT(S)"> <!ENTITY pms-ginfowp.warning-tm-maint '<extref docno="INSERT THE MAINTENANCE TM NUMBER"/>'> <!ENTITY pms-ginfowp.warning-tm-arm ' and all armament must be safetied, deactivated, and cleared <extref docno="INSERT THE ARMAMENT TM NUMBER"/>'> <!ENTITY pms-ginfowp.manhours "INSERT THE TOTAL NUMBER OF MAN-HOURS"> <!ENTITY pms-ginfowp.odc "INSERT THE ODC STATEMENT"> <!ENTITY pms-ginfowp.hazmat "INSERT THE HAZMAT STATEMENT"> <!ENTITY pms_or_pmi.eir.address "INSERT PROPONENT MAILING ADDRESS"> <!ENTITY pms_or_pmi.eir.fax '<phone type="dsn" receive="fax">INSERT PROPONENT DSN FAX NUMBER</phone> or <phone type="coml" receive="fax">INSERT PROPONENT COMMERCIAL FAX NUMBER</phone>'> <!ENTITY pms_or_pmi.eir.email '<internet show.address="yes"><email address="INSERT PROPONENT E-MAIL ADDRESS"/></internet>'> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** PMI General Information ** ** -INSTRUCTION- ** -INSERT- The aircraft model. -ENTITY- pm-ginfowp.aircraft ** ** -INSERT- The flight hour cycle to perform the PM requirements ** -ENTITY- pm-ginfowp.flight-cycle ** ** -INSERT- The flight hour phases. -ENTITY- pm-ginfowp.phase-hours ** ** -INSERT- The maximum number of phases during the flight cycle. ** -ENTITY- pm-ginfowp.no-phases ** ** -INSERT- The latest issue of the aircraft TM number series Maintenance ** Manuals that contain the instructions for repair, adjustment or ** other means of rectifying conditions. Also contains the special ** tolerances, limits or instructions for special troubleshooting ** to find causes for malfunctions. -ENTITY- pm-ginfowp.tm-maint ** ** -INSERT- The changeover to phased maintenance system either a TM or TB ** number. -ENTITY- pm-ginfowp.tm-changeover ** ** -INSERT- The possible 'Inspect Phase Type.' entries with a brief ** explanation for each entry. -ENTITY- pm-ginforwp.codes-expl ** ** -INSTRUCTION ** Reference to the WP sequence # or title and figure # that shows the ** aircraft's inspection areas (Figure 1 -ENTITY- pm-ginfowp.fig1), and ** required removal locations of access doors and panels inspection areas ** (Figure 2 -ENTITY- pm-ginfowp.fig2). ** -INSERT- The WP identifier where the appropriate figure resides. ** -INSERT- The figure unique identifier. ** ** -ENTITY USED IN ENTITY- ** pm-ginfowp.geninfo-additional ** pm-ginfowp.geninfo-phased ** pm-ginfowp.geninfo-progressive ** ** -ENTITY LIST- ** pm-ginfowp.aircraft ** pm-ginfowp.flight-cycle ** pm-ginfowp.phase-hours ** pm-ginfowp.no-phases ** pm-ginfowp.inspect-interval ** pm-ginfowp.tm-maint ** pm-ginfowp.tm-changeover ** pm-ginforwp.codes-expl ** pm-ginfowp.fig1 ** pm-ginfowp.fig2 ** pms_or_pmi-tm (see selectboil.ent) ** ** -SOURCE ** MIL-STD-40051-1C ** B.5.6 General information work package (Phased Maintenance Inspection ** Manual only) <pm-ginfowp> ** B.5.6.3 General information <geninfo>. ** ** MIL-STD-40051-2C ** B.5.6 General information work package (Phased Maintenance Inspection ** Manual only) <pm-ginfowp> ** B.5.6.3 General information <geninfo>. ******************************************************************************** --> <![%pms_or_pmi-tm;[ <!ENTITY pm-ginfowp.aircraft "INSERT WITH AIRCRAFT MODEL"> <!ENTITY pm-ginfowp.flight-cycle "INSERT WITH FLIGHT HOUR CYCLE"> <!ENTITY pm-ginfowp.phase-hours "INSERT WITH PHASE HOURS"> <!ENTITY pm-ginfowp.no-phases "INSERT WITH NUMBER OF PHASES"> <!ENTITY pm-ginfowp.inspect-interval "INSPECT INSPECTION INTERVAL"> <!ENTITY pm-ginfowp.tm-maint '<extref docno="INSERT WITH AIRCRAFT MAINTENANCE TM NUMBER"/>'> <!ENTITY pm-ginfowp.tm-changeover '<extref docno="INSERT WITH AIRCRAFT CHANGEOVER TM/TB NUMBER" posttext=" entitled, “INSERT TM/TB TITLE”"/>'> <!ENTITY pm-ginfowp.codes-expl "INSERT APPROPRIATE CODES/EXPLANATIONS"> <!ENTITY pm-ginfowp.fig1 "<xref wpid='INSERT_THE_WORK_PACKAGE_ID' figid='INSERT-FIGURE-ID'/>"> <!ENTITY pm-ginfowp.fig2 "<xref wpid='INSERT_THE_WORK_PACKAGE_ID' figid='INSERT-FIGURE-ID'/>"> ]]> <!-- DOCUMENTATION ******************************************************************************** ** M A I N T E N A N C E I N F O R M A T I O N C H A P T E R ( M I M ) ** ** ** E D I T A B L E D A T A ******************************************************************************** --> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Illustration Manufactured Parts Maintenance Level ** ** RPTSL Parts Maintenance Level ** -INSTRUCTION- ** -REPLACE- With appropriate maintenance level ** ** -ENTITY USED IN ENTITY- ** manu_items_introwp.intro ** ** -ENTITY LIST- ** manu_items_introwp.maint-level ** -ENTITY USED IN ENTITY- ** introwp-intro-non-aviation ** ** introwp.intro-av ** ** -ENTITY LIST- ** introwp_intro.maint-level ** ** -SOURCE- ** MIL-STD-40051-2 ** E.5.3.10.1.3 Introduction for illustrated list of manufacture items work ** package <intro> ******************************************************************************** --> <!ENTITY manu_items_introwp.maint-level "INSERT MAINTENANCE LEVEL"> <!ENTITY introwp_intro.maint-level "INSERT MAINTENANCE LEVEL"> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Illustration Manufactured Parts RPSTL Reference ** ** -INSTRUCTION- ** -REPLACE- With appropriate RPSTL reference ** ** -ENTITY USED IN ENTITY- ** manu_items_introwp ** ** -ENTITY LIST- ** manu_items_introwp.rpstl ** ** -SOURCE- ** MIL-STD-40051-1C ** E.5.3.10.1.3 Introduction for illustrated list of manufactured items work package <intro>. ** ** MIL-STD-40051-2C ** E.5.3.10.1.3 Introduction for illustrated list of manufactured items work package <intro>. ******************************************************************************* --> <!ENTITY manu_items_introwp.rpstl '<extref docno="WHEN APPLICABLE, A REFERENCE TO THE ASSOCIATED PARTS INFORMATION TM"/> OR <xref wpid="RPSTL_PART_LIST_WORK_PACKAGE"/>.'> <!-- DOCUMENTATION ******************************************************************************** ** LUBRICATION ORDERS ** -TITLE- ** PMCS AOAP Hour/Mileage Timeframe ** ** -INSTRUCTION- ** -REPLACE- With AOAP hour/mileage timeframe. ** ** -ENTITY USED IN ENTITY- ** pmcsintrowp.intro.aoap ** ** -ENTITY LIST- ** pmcsintrowp.intro.aoap.prescribed ** page-base (see selectboil.ent) ** ** -SOURCE- ** MIL-STD-40051-1C ** K.5.3.3.1 Army Oil Analysis Program (AOAP) sampling interval statement. ** ** MIL-STD-40051-2C ** K.5.3.3.1 Army Oil Analysis Program (AOAP) sampling interval statement. ******************************************************************************** --> <![%page-base;[ <!ENTITY pmcsintrowp.intro.aoap.prescribed "Engine oil/transmission oil/hydraulic fluids must be sampled at (REPLACE WITH APPLICABLE HOUR/MILEAGE TIMEFRAME) as prescribed by (insert DA PAM 750-8 or DA PAM 738-751)."> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** PMCS AOAP Reference ** ** -INSTRUCTION- ** -IF- AOAP reference is TB 43-0106 ** -THEN- ** -REPLACE- "IGNORE" with "INCLUDE" ** -REPLACE- "INCLUDE" with "IGNORE" ** -IF- AOAP reference is DA PAM 738-750 ** -THEN- No change ** ** -ENTITY USED IN ENTITY- ** pmcsintrowp.intro.aoap ** ** -ENTITY LIST- ** pmcsintrowp.intro.aoap.timeframe ** page-base (see selectboil.ent) ** ** -SOURCE- ** MIL-STD-40051-2 ** K.5.3.3.1 Army Oil Analysis Program (AOAP) statements. ******************************************************************************** --> <![%page-base;[ <!ENTITY pmcsintrowp.intro.aoap.timeframe '<![IGNORE[<extref docno="TB 43-0106" posttext=", Aeronautical Equipment Army Oil Analysis Program (AOAP)"/>]]> <![INCLUDE[<extref docno="DA PAM 738-750" posttext=", Functional Users Guide for the Army Maintenance Management System (TAMMS)"/>]]>'> ]]> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** LO Introduction Component or Equipment ** ** -INSTRUCTION- ** -REPLACE- With component or equipment used in LO. ** ** -ENTITY LIST- ** lo.intro.component-equipment ** ** -ENTITY USED IN ENTITY- ** lo.intro.aoap-na ** ** -SOURCE- ** MIL-STD-40051-1 ** E.5.3.4.1.3 PMCS data ** d(3) AOAP not available/non-enrolled statement ** ** MIL-STD-40051-2 ** E.5.3.4.1.3 PMCS data ** d(3) AOAP not available/non-enrolled statement ** ** -ENTITY USED IN ENTITY- ** pmcsintrowp.intro.fluid-leakage ** ** MIL-STD-40051-1 ** E.5.3.4.1.3 PMCS data ** d(3) AOAP not available/non-enrolled statement ** ** -SOURCE- ** MIL-STD-40051-2 ** E.5.3.4.1.3 PMCS data ** e When the equipment contains fluids ******************************************************************************** --> <!ENTITY lo.intro.component-equipment "REPLACE WITH NAME OF COMPONENT/EQUIPMENT"> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** PMCS Introduction Not Authorized Arctic Operation Component ** ** -INSTRUCTION- ** -REPLACE- With not authorized arctic operation component(s). ** ** -ENTITY USED IN ENTITY- ** pmcswp.pmcstable.pmcsproc.arctic-oper.not-auth ** ** -ENTITY LIST- ** pmcswp.pmcstable.pmcsproc.arctic-oper.not-auth.component ** ** -SOURCE- ** MIL-STD-40051-1 ** E.5.3.4.2.3.1 PMCS data preparation <pmcswp.pmcstable> ** e Procedure <pmcsproc> ** (8) For Arctic Operation ** ** MIL-STD-40051-2 ** E.5.3.4.2.3.1 PMCS data preparation <pmcswp.pmcstable> ** e Procedure <pmcsproc> ** (8) For Arctic Operation ******************************************************************************** --> <!ENTITY pmcswp.pmcstable.pmcsproc.arctic-oper.not-auth.component "REPLACE WITH COMPONENT NAME"> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Maintenance WP Inspection And Test Ammunition Referenced Table ** ** -INSTRUCTION- ** -INSERT- The table identifier containing the inspection and test information. ** ** -ENTITY USED IN ENTITY- ** maintwp.test-inspect.disposition-2 ** ** -ENTITY LIST- ** maintwp.test-inspect.disposition-2.table-num ** ** -SOURCE- ** MIL-STD-40051-2 ** E.5.3.5.3.16.1.g(2) Inspection and test of conventional and chemical ** ammunition or components containing radioactive materials ** (DS, GS, and AVIM only) <test-inspect>. ******************************************************************************** --> <!ENTITY maintwp.test-inspect.disposition-2.table-num '<xref tableid="INSERT_ID_APPLICABLE_TABLE"/>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Aircraft Inspection Checklist TM for PMI WP ** ** -INSTRUCTION- ** -INSERT- The aircraft inspection checklist TM number. ** ** -ENTITY USED IN ENTITY- ** pmiwp.geninfo ** ** -ENTITY LIST- ** pmiwp.geninfo.aircraft ** ** -SOURCE- ** MIL-STD-40051-1 ** E.5.3.12.1.3 PMI General information and introduction <geninfo> ** ** MIL-STD-40051-2 ** E.5.3.12.1.3 PMI General information and introduction <geninfo> ******************************************************************************** --> <!ENTITY pmiwp.geninfo.aircraft '<extref docno="REPLACE WITH APPLICABLE AIRCRAFT INSPECTION CHECKLIST TM"/>'> <!-- DOCUMENTATION ******************************************************************************** ** P A R T S I N F O R M A T I O N C H A P T E R ( P I M ) ** ** E D I T A B L E D A T A ******************************************************************************** --> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** RPSTL Introduction Lowest Maintenance Level ** ** -INSTRUCTION- ** -INSERT- Lowest maintenance level. ** ** -ENTITY USED IN ENTITY- ** introwp.intro ** ** -ENTITY LIST- ** introwp.intro.lowest-maint ** ** -SOURCE- ** MIL-STD-40051-1 ** F.5.3.5.3 Introduction <intro> ** ** MIL-STD-40051-2 ** F.5.3.5.3 Introduction <intro> ******************************************************************************** --> <!ENTITY introwp.intro.lowest-maint "INSERT LOWEST MAINTENANCE LEVEL"> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** RPSTL Introduction Equipment Nomenclature ** ** -INSTRUCTION- ** -INSERT- The equipment nomenclature. ** ** -ENTITY USED IN ENTITY- ** introwp.intro ** ** -ENTITY LIST- ** introwp.intro.item ** ** -SOURCE- ** MIL-STD-40051-1 ** F.5.3.5.3 Introduction <intro> ** ** MIL-STD-40051-2 ** F.5.3.5.3 Introduction <intro> ******************************************************************************** --> <!ENTITY introwp.intro.item "INSERT EQUIPMENT NOMENCLATURE"> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Maintenance Code "L" Specialized Repair Activity Designator ** ** -INSTRUCTION- ** -INSERT- The specialized repair activity designator. ** ** -ENTITY USED IN ENTITY- ** introwp.intro ** ** -ENTITY LIST- ** introwp.intro.repair-act-des ** ** -SOURCE- ** MIL-STD-40051-1 ** F.5.3.5.3 Introduction <intro> ** ** MIL-STD-40051-2 ** F.5.3.5.3 Introduction <intro> ******************************************************************************** --> <!ENTITY introwp.intro.repair-act-des "INSERT SPECIALIZED REPAIR ACTIVITY DESIGNATOR"> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Referenced Fabrication Instruction TM Number ** ** -INSTRUCTION- ** -INSERT- The TM number reference where the detailed fabrication instructions ** for items source coded to be manufactured or fabricated. ** ** -ENTITY USED IN ENTITY- ** introwp.intro ** ** -ENTITY LIST- ** introwp.intro.fab-tm ** ** -SOURCE- ** MIL-STD-40051-1 ** F.5.3.5.3 Introduction <intro> ** pg. 273-280 ** ** MIL-STD-40051-2 ** F.5.3.5.3 Introduction <intro> ** pg. 287-295 ******************************************************************************** --> <!ENTITY introwp.intro.fab-tm '<extref docno="INSERT FABRICATION INSTRUCTION TM NUMBER"/>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Associated Publications in Separate RPSTL TM ** ** The entity is used for separate RPSTL manual and associated publications apply. ** ** -INSTRUCTION- ** -IF- Separate RPSTL TM -AND- Associated Publications ** -THEN- ** -REPLACE- The <extref> "docno" attribute content with publication number ** and <def><para> with short publication title. ** -INSERT- For each additional publication reference the following: ** 1. <term.def id="UNIQUE.IDENTIFIER"> Unique ID suggestion is ** "rpstl.publication." with the document number (replace ** space " " with period "."). ** 2. <term><extref docno="INSERT DOCUMENT NUMBER"/></term> ** 3. <def><para esd="no" hcp="no">INSERT PUBLICATION SHORT TITLE</para></def> ** 4. </term.def> ** -ELSE- ** -REPLACE- "INCLUDE" with "IGNORE" ** ** -ENTITY USED IN ENTITY- ** introwp.intro ** ** -ENTITY LIST- ** introwp.intro.assoc-pubs ** ** -SOURCE- ** MIL-STD-40051-1 ** F.5.3.5.3 Introduction <intro> ** MIL-STD-40051-2 ** F.5.3.5.3 Introduction <intro> ******************************************************************************** --> <!ENTITY introwp.intro.assoc-pubs '<![IGNORE[ <para hcp="no" esd="no">Associated Publications. The publication(s) listed below pertains to the &introwp.intro.item; <deflist> <title.term.def> <title>Publication</title> <title>Short Title</title></title.term.def> <term.def id="rpstl.publication.DOCUMENT_NUMBER"> <term><extref docno="INSERT DOCUMENT_NUMBER"/></term> <def><para esd="no" hcp="no">INSERT PUBLICATION SHORT TITLE</para></def> </term.def> </deflist></para> ]]>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Reference TM number for Higher Maintenance Level RPSTL Data ** ** -INSERT- The TM number reference where the higher maintenance level RPSTL ** data is located. ** ** -ENTITY USED IN ENTITY- ** introwp.intro ** ** -ENTITY LIST- ** introwp.intro.higher-maint-tm ** ** -SOURCE- ** MIL-STD-40051-1 ** F.5.3.5.3 Introduction <intro> ** ** MIL-STD-40051-2 ** F.5.3.5.3 Introduction <intro> ******************************************************************************** --> <!ENTITY introwp.intro.higher-maint-tm '<extref docno="INSERT TM NUMBER FOR HIGHER MAINTENANCE LEVEL RPSTL DATA"/>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Uncommon Abbreviations and Definitions in RPSTL ** ** Include uncommon abbreviations and definitions used in the RPSTL that are not ** found in ASME Y14.38. ** ** -INSTRUCTION- ** -INSERT- For each uncommon abbreviations the following: ** 1. <term.def id="UNIQUE.IDENTIFIER"> Unique ID suggestion is ** "uncommon-abbr." with the abbreviation (replace space " " with period "."). ** 2. <term><extref docno="INSERT ABBREVIATION"/></term> ** 3. <def><para esd="no" hcp="no">INSERT ABBREVIATION MEANING</para></def> ** 4. </term.def> ** ** -ENTITY USED IN ENTITY- ** introwp.intro ** ** -ENTITY LIST- ** introwp.intro.uncommon-abbr ** ** MIL-STD-40051-1 ** F.5.3.5.3 Introduction <intro> ** MIL-STD-40051-2 ** F.5.3.5.3 Introduction <intro> ******************************************************************************** --> <!ENTITY introwp.intro.uncommon-abbr ' <term.def id="uncommon-abbr.INSERT_ABBREVIATION "> <term>INSERT ABBREVIATION</term> <def> <para hcp="no" esd="no">INSERT ABBREVIATION MEANING </para></def></term.def>'> <!-- DOCUMENTATION ******************************************************************************** ** S U P P O R T I N G I N F O R M A T I O N C H A P T E R ( S I M ) ** ** E D I T A B L E D A T A ******************************************************************************** --> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** UOC List ** ** When UOC is necessary, enter the corresponding UOC codes and descriptions. ** ** -INSTRUCTION- ** -IF- UOC is included ** -THEN- ** -INSERT- For each UOC the following: ** 1. <term.def id="UNIQUE.IDENTIFIER"> Unique ID suggestion is ** "uoc." with the UOC. ** 2. <term><extref docno="INSERT UOC"/></term> ** 3. <def><para esd="no" hcp="no">INSERT UOC MODEL NUMBER </para></def> ** 4. </term.def> ** -ELSE- ** -REPLACE- "INCLUDE" with "IGNORE" ** ** -ENTITY USED IN ELEMENT- ** AAL Introduction Work Package Introduction <introwp><intro> ** ** -ENTITY USED IN ENTITY- ** intro.uoc ** ** -ENTITY LIST- ** intro.uoc-list ** uoc-list (see selectboil.ent) ******************************************************************************** --> <!ENTITY intro.uoc-list ' <![%uoc-list;[ <deflist> <title.term.def> <title>Code</title> <title>Used on</title></title.term.def> <term.def id="uoc.PAA"> <term>PAA</term> <def><para hcp="no" esd="no">XXX</para></def></term.def> <term.def id="uoc.PAB"> <term>PAB</term> <def><para hcp="no" esd="no">XXXX</para></def></term.def> <term.def id="uoc.PAC"> <term>PAC</term> <def><para hcp="no" esd="no">XXXXX</para></def></term.def> </deflist> ]]>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** UOC List explaination ** ** Add if applicable. ** ** -INSTRUCTION- ** -IF- UOC is included and certain AAL items contain a certain model number ** -THEN- ** -INSERT- For explaination ** -ELSE- ** -REPLACE- "INCLUDE" with "IGNORE" ** ** -ENTITY USED IN ELEMENT- ** AAL Introduction Work Package Introduction <intro> ** ** -ENTITY USED IN ENTITY- ** intro.uoc ** ** -ENTITY LIST- ** intro.uoc-list.explain ******************************************************************************** --> <!ENTITY intro.uoc-list.explain '<para hcp="no" esd="no">Model XXX uses AAL items (insert item numbers), Model XXXX use AAL items (insert item numbers), and Model XXXXX use AAL items (insert item numbers)</para>'> <!-- DOCUMENTATION ******************************************************************************** ** Comment - 12-07-2007 SDH. Maintenance level was modified IAW ** MIL-STD-40051 -1/-1 Change 2. ** ** -TITLE- ** Expendable and Durable Maintenance Level Codes ** ** Specify the maintenance levels that are applicable for the expendable and ** durable list. ** ** -INSTRUCTION- ** -REMOVE- Text not qualified in the maintenance level ** ** -EXAMPLE- ** The lowest maintenance level is Field the following would be used ** "F = Field/ASB, H = Below Depot, D = Depot". ** Crew and Service/AMC would be removed. ** ** -TEMPLATE- ** C=Crew, O = AMC, F = Maintainer/ASB, H = Below Depot or TASMG, D = Depot ** ** -ENTITY USED IN ELEMENT- ** Expendable and Durable List Work Package <explistwp> ** ** -SOURCE- ** MIL-STD-40051-1 Change 2 ** G.5.6.3 Introduction for expendable and durable items list work package ** <intro>. ** ** MIL-STD-40051-2 Change 2 ** G.5.6.3 Introduction for expendable and durable items list work package ** <intro>. ** ** -ENTITY LIST- ** explistwp.intro.explain.level ******************************************************************************** --> <!ENTITY explistwp.intro.level 'C = Crew, O = AMC, F = Maintainer or ASB, H = Below Depot or TASMG, D = Depot'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Lubrication Order (LO) card <lubeorder>. ** ** -INSTRUCTION- ** -INSERT- lubrication.statement.gp ** ** -EXAMPLE- ** "A copy of this lubrication order will remain with the equipment at all times; instructions contained herein are mandatory." ** ** -ENTITY USED IN ELEMENT- ** Lubrication order (LO) statement <general_purpose_notices> ** ** -SOURCE- ** MIL-STD-40051-1C ** K.5.2.7 Lubrication order (LO) statement <general_purpose_notices> ** The following statement shall be included in the identification information of the LO: ** MIL-STD-40051-2C ** K.5.2.7 Lubrication order (LO) statement <general_purpose_notices>. ** ** -ENTITY LIST- ** lubrication.statement.gp ** oil.filter.statement ** aoap.statement ** aoap.notavail.statement ** warranty.hardtime.statement ******************************************************************************** --> <!ENTITY lubrication.statement.gp '<general_purpose_notices><title>Lubrication Order (LO)</title><text>A copy of this lubrication order will remain with the equipment at all times; instructions contained herein are mandatory.</text></general_purpose_notices>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Oil Filter Statement <intro><para0><subpara1><title></title><para></para><subpara2> ** ** -INSTRUCTION- ** -INSERT- oil.filter.statement ** ** -ENTITY USED IN ELEMENT- ** <intro> ** ** -SOURCE- ** MIL-STD-40051-1C ** K.5.3.2 Oil filter statement. ** MIL-STD-40051-2C ** K.5.3.2 Oil filter statement. ** ** -ENTITY LIST- ** oil.filter.statement ******************************************************************************** --> <!ENTITY oil.filter.statement '<subpara2><title>OIL FILTERS</title><para>Oil filters shall be serviced/cleaned/changed as applicable, when: <seqlist> <item label="a.">They are known to be contaminated, or clogged,</item> <item label="b.">Service is recommended by Army Oil Analysis Program (AOAP) laboratory analysis, or</item> <item label="c.">At prescribed hardtime intervals.</item> </seqlist> </para> </subpara2>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Army Oil Analysis Program (AOAP) statements.<intro><para0><subpara1><title></title><para></para><subpara2> ** ** -INSTRUCTION- ** -INSERT- aoap.statement ** ** -ENTITY USED IN ELEMENT- ** <intro> ** ** -SOURCE- ** MIL-STD-40051-1C ** K.5.3.3 Army Oil Analysis Program (AOAP) statements. ** MIL-STD-40051-2C ** K.5.3.3 Army Oil Analysis Program (AOAP) statements. ** ** -ENTITY LIST- ** aoap.statement ******************************************************************************** --> <!ENTITY aoap.statement '<subpara2> <title>Army Oil Analysis Program (AOAP) Sampling Interval</title> <para>Engine oil/transmission oil/hydraulic fluids must be sampled at (REPLACE WITH applicable hour/mileage time frame) as prescribed by <extref docno="DA PAM 750-8"/> or <extref docno="DA PAM 738-751"/></para> </subpara2>'> <!-- DOCUMENTATION ******************************************************************************** ** -TITLE- ** Army Oil Analysis Program (AOAP) statements.<intro><para0><subpara1><title></title><para></para><subpara2> ** ** -INSTRUCTION- ** -INSERT- aoap.notavail.statement ** ** -ENTITY USED IN ELEMENT- ** <intro> ** ** -SOURCE- ** MIL-STD-40051-1C ** K.5.3.3 Army Oil Analysis Program (AOAP) statements. ** MIL-STD-40051-2C ** K.5.3.3 Army Oil Analysis Program (AOAP) statements. ** ** -ENTITY LIST- ** aoap.notavail.statement ******************************************************************************** --> <!ENTITY aoap.notavail.statement '<subpara2> <title>Army Oil Analysis Program (AOAP) not available/non-enrolled</title> <para>This (REPLACE WITH NAME OF COMPONENT/EQUIPMENT) is not enrolled in the Army Oil Analysis Program. HARDTIME INTERVALS APPLY.</para> </subpara2>'>